You can use any DID number from virtualphoneline.com with your Linksys Pap2
Device:
* Get a sip address for your pap2 from websites such as www.fwdpulver.com,
www.gizmoproject.com
* Once you have an account from them, configure their account with your
LinkSys pap2.
Pick up phone on PAP2 dial **** to login. Dial 110# for the IP address.
Once you have the ip address, type it on your browser and open. It will
going to ask you the admin level user name and password.
Once you are done with the password thing, go to line / user 1 and your
Display name in Display name section
Write your user name in user name section
Authorization id
Proxy = proxy01.sipphone.com
submit
Now Pap2 should be configure with the gizmo account.
You can check if it is configure or not by picking up the handset of the
phone to see if you can hear the tone or not.
Now login in your virtualphoneline.com account.
Click on My numbers and then click on change ring to number button.
Click on Sip tab and write your sip address as provided by sip phone (e.g)
justmuneeb(User id)@proxy01.sipphone.com or (171xxxxx@proxy01.sipphone.com)
and the number will be forwarded to your Linksys.
Regards,
Muneeb Iqbal
